類別 yii\widgets\Spaceless
Spaceless 小部件會移除 HTML 標籤之間的空白字元。HTML 標籤內或純文字中的空白字元將永遠保持不變。
使用範例
<body>
<?php Spaceless::begin(); ?>
<div class="nav-bar">
<!-- tags -->
</div>
<div class="content">
<!-- tags -->
</div>
<?php Spaceless::end(); ?>
</body>
此範例將產生以下 HTML
<body>
<div class="nav-bar"><!-- tags --></div><div class="content"><!-- tags --></div></body>
此方法並非設計用於內容壓縮(您應該使用 gzip
輸出壓縮來達成目的)。主要目的是移除 HTML 標籤之間多餘的空白字元,以避免在某些情況下(例如,行內區塊元素之間的新行)瀏覽器渲染時出現異常。
注意,絕對不要對 pre
或 textarea
標籤使用此方法。處理這些標籤並不像乍看之下那麼簡單。針對這種情況,您應該考慮改用 HTML Tidy Project。
公共屬性
屬性 | 類型 | 描述 | 定義於 |
---|---|---|---|
$autoIdPrefix | 字串 | 自動產生的 Widget ID 的前綴。 | yii\base\Widget |
$behaviors | yii\base\Behavior[] | 附加到此組件的行為列表。 | yii\base\Component |
$id | 字串|null | Widget 的 ID。 | yii\base\Widget |
$view | yii\web\View | 可用於渲染視圖或視圖檔案的視圖物件。 | yii\base\Widget |
$viewPath | 字串 | 包含此 Widget 的視圖檔案的目錄。 | yii\base\Widget |
公共方法
事件
事件 | 類型 | 描述 | 定義於 |
---|---|---|---|
EVENT_AFTER_RUN | yii\base\WidgetEvent | 在執行 Widget 後立即引發的事件。(自版本 2.0.11 起可用) | yii\base\Widget |
EVENT_BEFORE_RUN | yii\base\WidgetEvent | 在執行 Widget 前立即引發的事件。(自版本 2.0.11 起可用) | yii\base\Widget |
EVENT_INIT | yii\base\Event | 透過 init() 初始化 Widget 時觸發的事件。(自版本 2.0.11 起可用) | yii\base\Widget |
方法詳情
定義於: yii\base\Component::__call()
呼叫未定義為類別方法的具名方法。
此方法將檢查是否有任何附加的行為具有具名方法,並在可用時執行它。
不要直接呼叫此方法,因為它是一個 PHP 魔術方法,當調用未知方法時,它會被隱式呼叫。
public mixed __call ( $name, $params ) | ||
$name | 字串 |
方法名稱 |
$params | array |
方法參數 |
return | mixed |
方法傳回值 |
---|---|---|
throws | yii\base\UnknownMethodException |
當呼叫未知方法時 |
public function __call($name, $params)
{
$this->ensureBehaviors();
foreach ($this->_behaviors as $object) {
if ($object->hasMethod($name)) {
return call_user_func_array([$object, $name], $params);
}
}
throw new UnknownMethodException('Calling unknown method: ' . get_class($this) . "::$name()");
}
public void __clone ( ) |
public function __clone()
{
$this->_events = [];
$this->_eventWildcards = [];
$this->_behaviors = null;
}
定義於: yii\base\BaseObject::__construct()
建構子。
預設實作會做兩件事
- 使用給定的組態
$config
初始化物件。 - 呼叫 init()。
如果子類別中覆寫了此方法,建議
- 建構子的最後一個參數是組態陣列,例如此處的
$config
。 - 在建構子的結尾呼叫父類別實作。
public void __construct ( $config = [] ) | ||
$config | array |
將用於初始化物件屬性的名稱-值對 |
public function __construct($config = [])
{
if (!empty($config)) {
Yii::configure($this, $config);
}
$this->init();
}
定義於: yii\base\Component::__get()
傳回組件屬性的值。
此方法將依以下順序檢查並採取相應行動
- 由 getter 定義的屬性:傳回 getter 結果
- 行為的屬性:傳回行為屬性值
不要直接呼叫此方法,因為它是一個 PHP 魔術方法,當執行 $value = $component->property;
時,它會被隱式呼叫。
另請參閱 __set()。
public mixed __get ( $name ) | ||
$name | 字串 |
屬性名稱 |
return | mixed |
屬性值或行為的屬性值 |
---|---|---|
throws | yii\base\UnknownPropertyException |
如果未定義屬性 |
throws | yii\base\InvalidCallException |
如果屬性是唯寫的。 |
public function __get($name)
{
$getter = 'get' . $name;
if (method_exists($this, $getter)) {
// read property, e.g. getName()
return $this->$getter();
}
// behavior property
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->canGetProperty($name)) {
return $behavior->$name;
}
}
if (method_exists($this, 'set' . $name)) {
throw new InvalidCallException('Getting write-only property: ' . get_class($this) . '::' . $name);
}
throw new UnknownPropertyException('Getting unknown property: ' . get_class($this) . '::' . $name);
}
定義於: yii\base\Component::__isset()
檢查屬性是否已設定,亦即已定義且非 null。
此方法將依以下順序檢查並採取相應行動
- 由 setter 定義的屬性:傳回屬性是否已設定
- 行為的屬性:傳回屬性是否已設定
- 針對不存在的屬性傳回
false
不要直接呼叫此方法,因為它是一個 PHP 魔術方法,當執行 isset($component->property)
時,它會被隱式呼叫。
public boolean __isset ( $name ) | ||
$name | 字串 |
屬性名稱或事件名稱 |
return | boolean |
具名屬性是否已設定 |
---|
public function __isset($name)
{
$getter = 'get' . $name;
if (method_exists($this, $getter)) {
return $this->$getter() !== null;
}
// behavior property
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->canGetProperty($name)) {
return $behavior->$name !== null;
}
}
return false;
}
定義於: yii\base\Component::__set()
設定組件屬性的值。
此方法將依以下順序檢查並採取相應行動
- 由 setter 定義的屬性:設定屬性值
- 格式為 "on xyz" 的事件:將處理常式附加到事件 "xyz"
- 格式為 "as xyz" 的行為:附加名為 "xyz" 的行為
- 行為的屬性:設定行為屬性值
不要直接呼叫此方法,因為它是一個 PHP 魔術方法,當執行 $component->property = $value;
時,它會被隱式呼叫。
另請參閱 __get()。
public void __set ( $name, $value ) | ||
$name | 字串 |
屬性名稱或事件名稱 |
$value | mixed |
屬性值 |
throws | yii\base\UnknownPropertyException |
如果未定義屬性 |
---|---|---|
throws | yii\base\InvalidCallException |
如果屬性是唯讀的。 |
public function __set($name, $value)
{
$setter = 'set' . $name;
if (method_exists($this, $setter)) {
// set property
$this->$setter($value);
return;
} elseif (strncmp($name, 'on ', 3) === 0) {
// on event: attach event handler
$this->on(trim(substr($name, 3)), $value);
return;
} elseif (strncmp($name, 'as ', 3) === 0) {
// as behavior: attach behavior
$name = trim(substr($name, 3));
$this->attachBehavior($name, $value instanceof Behavior ? $value : Yii::createObject($value));
return;
}
// behavior property
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->canSetProperty($name)) {
$behavior->$name = $value;
return;
}
}
if (method_exists($this, 'get' . $name)) {
throw new InvalidCallException('Setting read-only property: ' . get_class($this) . '::' . $name);
}
throw new UnknownPropertyException('Setting unknown property: ' . get_class($this) . '::' . $name);
}
定義於: yii\base\Component::__unset()
將組件屬性設定為 null。
此方法將依以下順序檢查並採取相應行動
- 由 setter 定義的屬性:將屬性值設定為 null
- 行為的屬性:將屬性值設定為 null
不要直接呼叫此方法,因為它是一個 PHP 魔術方法,當執行 unset($component->property)
時,它會被隱式呼叫。
public void __unset ( $name ) | ||
$name | 字串 |
屬性名稱 |
throws | yii\base\InvalidCallException |
如果屬性是唯讀的。 |
---|
public function __unset($name)
{
$setter = 'set' . $name;
if (method_exists($this, $setter)) {
$this->$setter(null);
return;
}
// behavior property
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->canSetProperty($name)) {
$behavior->$name = null;
return;
}
}
throw new InvalidCallException('Unsetting an unknown or read-only property: ' . get_class($this) . '::' . $name);
}
定義於: yii\base\Widget::afterRun()
此方法會在 Widget 執行後立即被調用。
此方法將觸發 EVENT_AFTER_RUN 事件。此方法的傳回值將用作 Widget 的傳回值。
如果您覆寫此方法,您的程式碼應如下所示
public function afterRun($result)
{
$result = parent::afterRun($result);
// your custom code here
return $result;
}
public mixed afterRun ( $result ) | ||
$result | mixed |
Widget 傳回結果。 |
return | mixed |
已處理的 Widget 結果。 |
---|
public function afterRun($result)
{
$event = new WidgetEvent();
$event->result = $result;
$this->trigger(self::EVENT_AFTER_RUN, $event);
return $event->result;
}
定義於: yii\base\Component::attachBehavior()
將行為附加到此組件。
此方法將根據給定的組態建立行為物件。之後,將透過呼叫 yii\base\Behavior::attach() 方法將行為物件附加到此組件。
另請參閱 detachBehavior()。
public yii\base\Behavior attachBehavior ( $name, $behavior ) | ||
$name | 字串 |
行為的名稱。 |
$behavior | 字串|陣列|yii\base\Behavior |
行為組態。這可以是下列其中一項
|
return | yii\base\Behavior |
行為物件 |
---|
public function attachBehavior($name, $behavior)
{
$this->ensureBehaviors();
return $this->attachBehaviorInternal($name, $behavior);
}
定義於: yii\base\Component::attachBehaviors()
將行為列表附加到組件。
每個行為都以其名稱索引,並且應該是 yii\base\Behavior 物件、指定行為類別的字串,或用於建立行為的組態陣列。
另請參閱 attachBehavior()。
public void attachBehaviors ( $behaviors ) | ||
$behaviors | array |
要附加到組件的行為列表 |
public function attachBehaviors($behaviors)
{
$this->ensureBehaviors();
foreach ($behaviors as $name => $behavior) {
$this->attachBehaviorInternal($name, $behavior);
}
}
定義於: yii\base\Widget::beforeRun()
此方法會在 Widget 執行前立即被調用。
此方法將觸發 EVENT_BEFORE_RUN 事件。此方法的傳回值將決定 Widget 是否應繼續執行。
當覆寫此方法時,請確保您呼叫父類別實作,如下所示
public function beforeRun()
{
if (!parent::beforeRun()) {
return false;
}
// your custom code here
return true; // or false to not run the widget
}
public boolean beforeRun ( ) | ||
return | boolean |
Widget 是否應繼續執行。 |
---|
public function beforeRun()
{
$event = new WidgetEvent();
$this->trigger(self::EVENT_BEFORE_RUN, $event);
return $event->isValid;
}
開始一個 Widget。
此方法建立呼叫類別的實例。它將組態套用到建立的實例。稍後應呼叫相符的 end() 呼叫。由於某些 Widget 可能使用輸出緩衝,因此應在同一個視圖中進行 end() 呼叫,以避免中斷輸出緩衝的巢狀結構。
另請參閱 end()。
public static static begin ( $config = [] ) | ||
$config | array |
將用於初始化物件屬性的名稱-值對 |
return | yii\base\Widget |
新建立的 Widget 實例 |
---|
public static function begin($config = [])
{
$config['class'] = get_called_class();
/* @var $widget Widget */
$widget = Yii::createObject($config);
self::$stack[] = $widget;
return $widget;
}
定義於: yii\base\Component::behaviors()
傳回此組件應表現為的行為列表。
子類別可以覆寫此方法,以指定它們想要表現為的行為。
此方法的傳回值應為行為物件或組態的陣列,並以行為名稱索引。行為組態可以是指定行為類別的字串,或具有以下結構的陣列
'behaviorName' => [
'class' => 'BehaviorClass',
'property1' => 'value1',
'property2' => 'value2',
]
請注意,行為類別必須從 yii\base\Behavior 擴展。行為可以使用名稱或匿名方式附加。當名稱用作陣列鍵時,使用此名稱,稍後可以使用 getBehavior() 檢索行為,或使用 detachBehavior() 分離行為。匿名行為無法檢索或分離。
在此方法中宣告的行為將自動(按需)附加到組件。
public array behaviors ( ) | ||
return | array |
行為組態。 |
---|
public function behaviors()
{
return [];
}
定義於: yii\base\Component::canGetProperty()
傳回一個值,指示是否可以讀取屬性。
如果符合以下條件,則可以讀取屬性
- 類別具有與指定名稱關聯的 getter 方法(在這種情況下,屬性名稱不區分大小寫);
- 類別具有具有指定名稱的成員變數(當
$checkVars
為 true 時); - 附加的行為具有給定名稱的可讀屬性(當
$checkBehaviors
為 true 時)。
另請參閱 canSetProperty()。
public boolean canGetProperty ( $name, $checkVars = true, $checkBehaviors = true ) | ||
$name | 字串 |
屬性名稱 |
$checkVars | boolean |
是否將成員變數視為屬性 |
$checkBehaviors | boolean |
是否將行為的屬性視為此組件的屬性 |
return | boolean |
屬性是否可以讀取 |
---|
public function canGetProperty($name, $checkVars = true, $checkBehaviors = true)
{
if (method_exists($this, 'get' . $name) || $checkVars && property_exists($this, $name)) {
return true;
} elseif ($checkBehaviors) {
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->canGetProperty($name, $checkVars)) {
return true;
}
}
}
return false;
}
定義於: yii\base\Component::canSetProperty()
傳回一個值,指示是否可以設定屬性。
如果符合以下條件,則可以寫入屬性
- 類別具有與指定名稱關聯的 setter 方法(在這種情況下,屬性名稱不區分大小寫);
- 類別具有具有指定名稱的成員變數(當
$checkVars
為 true 時); - 附加的行為具有給定名稱的可寫屬性(當
$checkBehaviors
為 true 時)。
另請參閱 canGetProperty()。
public boolean canSetProperty ( $name, $checkVars = true, $checkBehaviors = true ) | ||
$name | 字串 |
屬性名稱 |
$checkVars | boolean |
是否將成員變數視為屬性 |
$checkBehaviors | boolean |
是否將行為的屬性視為此組件的屬性 |
return | boolean |
屬性是否可以寫入 |
---|
public function canSetProperty($name, $checkVars = true, $checkBehaviors = true)
{
if (method_exists($this, 'set' . $name) || $checkVars && property_exists($this, $name)) {
return true;
} elseif ($checkBehaviors) {
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->canSetProperty($name, $checkVars)) {
return true;
}
}
}
return false;
}
::class
。
定義於: yii\base\BaseObject::className()
傳回此類別的完整限定名稱。
public static string className ( ) | ||
return | 字串 |
此類別的完整限定名稱。 |
---|
public static function className()
{
return get_called_class();
}
public yii\base\Behavior|null detachBehavior ( $name ) | ||
$name | 字串 |
行為的名稱。 |
return | yii\base\Behavior|null |
分離的行為。如果行為不存在,則為 Null。 |
---|
public function detachBehavior($name)
{
$this->ensureBehaviors();
if (isset($this->_behaviors[$name])) {
$behavior = $this->_behaviors[$name];
unset($this->_behaviors[$name]);
$behavior->detach();
return $behavior;
}
return null;
}
定義於: yii\base\Component::detachBehaviors()
從組件分離所有行為。
public void detachBehaviors ( ) |
public function detachBehaviors()
{
$this->ensureBehaviors();
foreach ($this->_behaviors as $name => $behavior) {
$this->detachBehavior($name);
}
}
public static static end ( ) | ||
return | yii\base\Widget |
已結束的 Widget 實例。 |
---|---|---|
throws | yii\base\InvalidCallException |
public static function end()
{
if (!empty(self::$stack)) {
$widget = array_pop(self::$stack);
$calledClass = get_called_class();
if (Yii::$container->has($calledClass) && isset(Yii::$container->getDefinitions()[$calledClass]['class'])) {
$calledClass = Yii::$container->getDefinitions()[$calledClass]['class'];
}
if (get_class($widget) === $calledClass) {
/* @var $widget Widget */
if ($widget->beforeRun()) {
$result = $widget->run();
$result = $widget->afterRun($result);
echo $result;
}
return $widget;
}
throw new InvalidCallException('Expecting end() of ' . get_class($widget) . ', found ' . get_called_class());
}
throw new InvalidCallException('Unexpected ' . get_called_class() . '::end() call. A matching begin() is not found.');
}
定義於: yii\base\Component::ensureBehaviors()
確保在 behaviors() 中宣告的行為已附加到此組件。
public void ensureBehaviors ( ) |
public function ensureBehaviors()
{
if ($this->_behaviors === null) {
$this->_behaviors = [];
foreach ($this->behaviors() as $name => $behavior) {
$this->attachBehaviorInternal($name, $behavior);
}
}
}
定義於: yii\base\Component::getBehavior()
傳回具名的行為物件。
public yii\base\Behavior|null getBehavior ( $name ) | ||
$name | 字串 |
行為名稱 |
return | yii\base\Behavior|null |
行為物件,若行為不存在則為 null |
---|
public function getBehavior($name)
{
$this->ensureBehaviors();
return isset($this->_behaviors[$name]) ? $this->_behaviors[$name] : null;
}
定義於: yii\base\Component::getBehaviors()
傳回附加到此組件的所有行為。
public yii\base\Behavior[] getBehaviors ( ) | ||
return | yii\base\Behavior[] |
附加到此元件的行為列表 |
---|
public function getBehaviors()
{
$this->ensureBehaviors();
return $this->_behaviors;
}
傳回 Widget 的 ID。
public string|null getId ( $autoGenerate = true ) | ||
$autoGenerate | boolean |
是否在先前未設定 ID 的情況下自動產生 ID |
return | 字串|null |
Widget 的 ID。 |
---|
public function getId($autoGenerate = true)
{
if ($autoGenerate && $this->_id === null) {
$this->_id = static::$autoIdPrefix . static::$counter++;
}
return $this->_id;
}
定義於: yii\base\Widget::getView()
傳回可用於渲染視圖或視圖檔案的視圖物件。
render() 和 renderFile() 方法將使用此視圖物件來實作實際的視圖渲染。若未設定,則預設為 "view" 應用程式元件。
public yii\web\View getView ( ) | ||
return | yii\web\View |
可用於渲染視圖或視圖檔案的視圖物件。 |
---|
public function getView()
{
if ($this->_view === null) {
$this->_view = Yii::$app->getView();
}
return $this->_view;
}
public string getViewPath ( ) | ||
return | 字串 |
包含此 Widget 的視圖檔案的目錄。 |
---|
public function getViewPath()
{
$class = new ReflectionClass($this);
return dirname($class->getFileName()) . DIRECTORY_SEPARATOR . 'views';
}
定義於: yii\base\Component::hasEventHandlers()
傳回一個值,指示是否有名為事件附加任何處理常式。
public boolean hasEventHandlers ( $name ) | ||
$name | 字串 |
事件名稱 |
return | boolean |
是否有任何處理器附加到事件上。 |
---|
public function hasEventHandlers($name)
{
$this->ensureBehaviors();
if (!empty($this->_events[$name])) {
return true;
}
foreach ($this->_eventWildcards as $wildcard => $handlers) {
if (!empty($handlers) && StringHelper::matchWildcard($wildcard, $name)) {
return true;
}
}
return Event::hasHandlers($this, $name);
}
定義於: yii\base\Component::hasMethod()
傳回一個值,指示是否已定義方法。
若符合以下條件,則定義方法:
- 類別具有指定名稱的方法
- 附加的行為具有給定名稱的方法 (當
$checkBehaviors
為 true 時)。
public boolean hasMethod ( $name, $checkBehaviors = true ) | ||
$name | 字串 |
屬性名稱 |
$checkBehaviors | boolean |
是否將行為的方法視為此元件的方法 |
return | boolean |
方法是否已定義 |
---|
public function hasMethod($name, $checkBehaviors = true)
{
if (method_exists($this, $name)) {
return true;
} elseif ($checkBehaviors) {
$this->ensureBehaviors();
foreach ($this->_behaviors as $behavior) {
if ($behavior->hasMethod($name)) {
return true;
}
}
}
return false;
}
定義於: yii\base\Component::hasProperty()
傳回一個值,指示是否為此組件定義了屬性。
若符合以下條件,則定義屬性:
- 類別具有與指定名稱相關聯的 getter 或 setter 方法 (在此情況下,屬性名稱不區分大小寫);
- 類別具有具有指定名稱的成員變數(當
$checkVars
為 true 時); - 附加的行為具有給定名稱的屬性 (當
$checkBehaviors
為 true 時)。
參見
public boolean hasProperty ( $name, $checkVars = true, $checkBehaviors = true ) | ||
$name | 字串 |
屬性名稱 |
$checkVars | boolean |
是否將成員變數視為屬性 |
$checkBehaviors | boolean |
是否將行為的屬性視為此組件的屬性 |
return | boolean |
屬性是否已定義 |
---|
public function hasProperty($name, $checkVars = true, $checkBehaviors = true)
{
return $this->canGetProperty($name, $checkVars, $checkBehaviors) || $this->canSetProperty($name, false, $checkBehaviors);
}
開始捕捉輸出,以便從 HTML 標籤之間的空白字元中清除。
public void init ( ) |
public function init()
{
parent::init();
ob_start();
ob_implicit_flush(false);
}
定義於: yii\base\Component::off()
從此組件分離現有的事件處理常式。
此方法與 on() 方法相反。
注意:若為事件名稱傳遞萬用字元模式,則只會移除以此萬用字元註冊的處理器,而以符合此萬用字元的純文字名稱註冊的處理器將會保留。
參見 on()。
public boolean off ( $name, $handler = null ) | ||
$name | 字串 |
事件名稱 |
$handler | callable|null |
要移除的事件處理器。若為 null,則會移除附加到具名事件的所有處理器。 |
return | boolean |
若找到並分離處理器 |
---|
public function off($name, $handler = null)
{
$this->ensureBehaviors();
if (empty($this->_events[$name]) && empty($this->_eventWildcards[$name])) {
return false;
}
if ($handler === null) {
unset($this->_events[$name], $this->_eventWildcards[$name]);
return true;
}
$removed = false;
// plain event names
if (isset($this->_events[$name])) {
foreach ($this->_events[$name] as $i => $event) {
if ($event[0] === $handler) {
unset($this->_events[$name][$i]);
$removed = true;
}
}
if ($removed) {
$this->_events[$name] = array_values($this->_events[$name]);
return true;
}
}
// wildcard event names
if (isset($this->_eventWildcards[$name])) {
foreach ($this->_eventWildcards[$name] as $i => $event) {
if ($event[0] === $handler) {
unset($this->_eventWildcards[$name][$i]);
$removed = true;
}
}
if ($removed) {
$this->_eventWildcards[$name] = array_values($this->_eventWildcards[$name]);
// remove empty wildcards to save future redundant regex checks:
if (empty($this->_eventWildcards[$name])) {
unset($this->_eventWildcards[$name]);
}
}
}
return $removed;
}
將事件處理常式附加到事件。
事件處理器必須是有效的 PHP 回呼。以下是一些範例
function ($event) { ... } // anonymous function
[$object, 'handleClick'] // $object->handleClick()
['Page', 'handleClick'] // Page::handleClick()
'handleClick' // global function handleClick()
事件處理器必須以以下簽章定義:
function ($event)
其中 $event
是一個 yii\base\Event 物件,其中包含與事件相關聯的參數。
自 2.0.14 版起,您可以將事件名稱指定為萬用字元模式
$component->on('event.group.*', function ($event) {
Yii::trace($event->name . ' is triggered.');
});
參見 off()。
public void on ( $name, $handler, $data = null, $append = true ) | ||
$name | 字串 |
事件名稱 |
$handler | 可呼叫 |
事件處理器 |
$data | mixed |
在事件觸發時要傳遞給事件處理器的資料。當事件處理器被叫用時,可以透過 yii\base\Event::$data 存取此資料。 |
$append | boolean |
是否將新的事件處理器附加到現有處理器列表的末尾。若為 false,則新的處理器將插入到現有處理器列表的開頭。 |
public function on($name, $handler, $data = null, $append = true)
{
$this->ensureBehaviors();
if (strpos($name, '*') !== false) {
if ($append || empty($this->_eventWildcards[$name])) {
$this->_eventWildcards[$name][] = [$handler, $data];
} else {
array_unshift($this->_eventWildcards[$name], [$handler, $data]);
}
return;
}
if ($append || empty($this->_events[$name])) {
$this->_events[$name][] = [$handler, $data];
} else {
array_unshift($this->_events[$name], [$handler, $data]);
}
}
定義於: yii\base\Widget::render()
渲染一個視圖。
要渲染的視圖可以使用以下格式之一指定:
- 路徑別名 (例如 "@app/views/site/index");
- 應用程式內的絕對路徑 (例如 "//site/index"):視圖名稱以雙斜線開頭。實際的視圖檔案將在應用程式的 視圖路徑 下尋找。
- 模組內的絕對路徑 (例如 "/site/index"):視圖名稱以單斜線開頭。實際的視圖檔案將在目前活動模組的 視圖路徑 下尋找。
- 相對路徑 (例如 "index"):實際的視圖檔案將在 $viewPath 下尋找。
如果視圖名稱不包含檔案副檔名,則會使用預設的 .php
。
public string render ( $view, $params = [] ) | ||
$view | 字串 |
視圖名稱。 |
$params | array |
應在視圖中提供的參數 (名稱-值 配對)。 |
return | 字串 |
渲染結果。 |
---|---|---|
throws | yii\base\InvalidArgumentException |
若視圖檔案不存在。 |
public function render($view, $params = [])
{
return $this->getView()->render($view, $params, $this);
}
定義於: yii\base\Widget::renderFile()
渲染一個視圖檔案。
public string renderFile ( $file, $params = [] ) | ||
$file | 字串 |
要渲染的視圖檔案。這可以是檔案路徑或路徑別名。 |
$params | array |
應在視圖中提供的參數 (名稱-值 配對)。 |
return | 字串 |
渲染結果。 |
---|---|---|
throws | yii\base\InvalidArgumentException |
若視圖檔案不存在。 |
public function renderFile($file, $params = [])
{
return $this->getView()->renderFile($file, $params, $this);
}
標記要從 HTML 標籤之間的空白字元中清除的內容的結尾。
停止捕捉輸出並回傳已清除的結果。
public void run ( ) |
public function run()
{
echo trim(preg_replace('/>\s+</', '><', ob_get_clean()));
}
設定 Widget 的 ID。
public void setId ( $value ) | ||
$value | 字串 |
Widget 的 ID。 |
public function setId($value)
{
$this->_id = $value;
}
定義於: yii\base\Widget::setView()
設定此 Widget 要使用的視圖物件。
public void setView ( $view ) | ||
$view | yii\base\View |
可用於渲染視圖或視圖檔案的視圖物件。 |
public function setView($view)
{
$this->_view = $view;
}
public void trigger ( $name, yii\base\Event $event = null ) | ||
$name | 字串 |
事件名稱 |
$event | yii\base\Event|null |
事件實例。若未設定,則會建立預設的 yii\base\Event 物件。 |
public function trigger($name, Event $event = null)
{
$this->ensureBehaviors();
$eventHandlers = [];
foreach ($this->_eventWildcards as $wildcard => $handlers) {
if (StringHelper::matchWildcard($wildcard, $name)) {
$eventHandlers[] = $handlers;
}
}
if (!empty($this->_events[$name])) {
$eventHandlers[] = $this->_events[$name];
}
if (!empty($eventHandlers)) {
$eventHandlers = call_user_func_array('array_merge', $eventHandlers);
if ($event === null) {
$event = new Event();
}
if ($event->sender === null) {
$event->sender = $this;
}
$event->handled = false;
$event->name = $name;
foreach ($eventHandlers as $handler) {
$event->data = $handler[1];
call_user_func($handler[0], $event);
// stop further handling if the event is handled
if ($event->handled) {
return;
}
}
}
// invoke class-level attached handlers
Event::trigger($this, $name, $event);
}
public static string widget ( $config = [] ) | ||
$config | array |
將用於初始化物件屬性的名稱-值對 |
return | 字串 |
Widget 的渲染結果。 |
---|---|---|
throws | Throwable |
public static function widget($config = [])
{
ob_start();
ob_implicit_flush(false);
try {
/* @var $widget Widget */
$config['class'] = get_called_class();
$widget = Yii::createObject($config);
$out = '';
if ($widget->beforeRun()) {
$result = $widget->run();
$out = $widget->afterRun($result);
}
} catch (\Exception $e) {
// close the output buffer opened above if it has not been closed already
if (ob_get_level() > 0) {
ob_end_clean();
}
throw $e;
} catch (\Throwable $e) {
// close the output buffer opened above if it has not been closed already
if (ob_get_level() > 0) {
ob_end_clean();
}
throw $e;
}
return ob_get_clean() . $out;
}
註冊 或 登入 以發表評論。