0 追蹤者

類別 yii\validators\RangeValidator

繼承關係yii\validators\RangeValidator » yii\validators\Validator » yii\base\Component » yii\base\BaseObject
實作介面yii\base\Configurable
自版本起可用2.0
原始碼 https://github.com/yiisoft/yii2/blob/master/framework/validators/RangeValidator.php

RangeValidator 驗證屬性值是否在值列表中。

範圍可以透過 $range 屬性指定。如果 $not 屬性設定為 true,驗證器將確保屬性值「不」在指定的範圍內。

公開屬性

隱藏繼承的屬性

屬性 類型 描述 定義於
$allowArray boolean 是否允許陣列類型屬性。 yii\validators\RangeValidator
$attributeNames array 屬性名稱。 yii\validators\Validator
$attributes array|string 由此驗證器驗證的屬性。 yii\validators\Validator
$behaviors yii\base\Behavior[] 附加到此組件的行為列表。 yii\base\Component
$builtInValidators array 內建驗證器列表 (名稱 => 類別或配置) yii\validators\Validator
$enableClientValidation boolean 是否為此驗證器啟用客戶端驗證。 yii\validators\Validator
$except array|string 驗證器不應套用的情境。 yii\validators\Validator
$isEmpty callable|null 一個 PHP 可呼叫物件,用於替換 isEmpty() 的預設實作。 yii\validators\Validator
$message string|null 使用者定義的錯誤訊息。 yii\validators\Validator
$not boolean 是否反轉驗證邏輯。 yii\validators\RangeValidator
$on array|string 驗證器可以套用的情境。 yii\validators\Validator
$range array|Traversable|Closure 屬性值應該在其中的有效值列表,或返回此類列表的匿名函式。 yii\validators\RangeValidator
$skipOnEmpty boolean 如果屬性值為 null 或空字串,是否應跳過此驗證規則。 yii\validators\Validator
$skipOnError boolean 如果根據先前的規則,要驗證的屬性已經存在一些驗證錯誤,是否應跳過此驗證規則。 yii\validators\Validator
$strict boolean 比較是否嚴格 (類型和值都必須相同) yii\validators\RangeValidator
$validationAttributes array|null 屬性名稱列表。 yii\validators\Validator
$when callable|null 一個 PHP 可呼叫物件,其回傳值決定是否應套用此驗證器。 yii\validators\Validator
$whenClient string|null 一個 JavaScript 函式名稱,其回傳值決定是否應在客戶端套用此驗證器。 yii\validators\Validator

公開方法

隱藏繼承的方法

方法 描述 定義於
__call() 呼叫非類別方法的具名方法。 yii\base\Component
__clone() 在透過複製現有物件建立物件後,會呼叫此方法。 yii\base\Component
__construct() 建構子。 yii\base\BaseObject
__get() 傳回組件屬性的值。 yii\base\Component
__isset() 檢查屬性是否已設定,即已定義且非 null。 yii\base\Component
__set() 設定組件屬性的值。 yii\base\Component
__unset() 將組件屬性設定為 null。 yii\base\Component
addError() 將關於指定屬性的錯誤新增至模型物件。 yii\validators\Validator
attachBehavior() 將行為附加到此組件。 yii\base\Component
attachBehaviors() 將行為列表附加到組件。 yii\base\Component
behaviors() 傳回此組件應表現為的行為列表。 yii\base\Component
canGetProperty() 傳回一個值,指示屬性是否可讀取。 yii\base\Component
canSetProperty() 傳回一個值,指示屬性是否可設定。 yii\base\Component
className() 傳回此類別的完整限定名稱。 yii\base\BaseObject
clientValidateAttribute() 傳回執行客戶端驗證所需的 JavaScript。 yii\validators\RangeValidator
createValidator() 建立驗證器物件。 yii\validators\Validator
detachBehavior() 從組件卸離行為。 yii\base\Component
detachBehaviors() 從組件卸離所有行為。 yii\base\Component
ensureBehaviors() 確保在 behaviors() 中宣告的行為已附加到此組件。 yii\base\Component
getAttributeNames() 傳回已清除的屬性名稱,不包含開頭的 ! 字元。 yii\validators\Validator
getBehavior() 傳回具名的行為物件。 yii\base\Component
getBehaviors() 傳回附加到此組件的所有行為。 yii\base\Component
getClientOptions() 傳回客戶端驗證選項。 yii\validators\RangeValidator
getValidationAttributes() 傳回此驗證器套用的屬性列表。 yii\validators\Validator
hasEventHandlers() 傳回一個值,指示是否有名稱事件附加任何處理常式。 yii\base\Component
hasMethod() 傳回一個值,指示是否已定義方法。 yii\base\Component
hasProperty() 傳回一個值,指示是否已為此元件定義屬性。 yii\base\Component
init() 初始化物件。 yii\validators\RangeValidator
isActive() 傳回一個值,指示驗證器是否針對給定的情境和屬性處於活動狀態。 yii\validators\Validator
isEmpty() 檢查給定的值是否為空。 yii\validators\Validator
off() 從此元件中卸載現有的事件處理器。 yii\base\Component
on() 將事件處理器附加到事件。 yii\base\Component
trigger() 觸發事件。 yii\base\Component
validate() 驗證給定的值。 yii\validators\Validator
validateAttribute() 驗證單一屬性。 yii\validators\RangeValidator
validateAttributes() 驗證指定的物件。 yii\validators\Validator

受保護的方法

隱藏繼承的方法

方法 描述 定義於
formatMessage() 如果 \Yii::$app 不可用,則使用 I18N 格式化訊息,或使用簡單的 strtr。 yii\validators\Validator
validateValue() 驗證值。 yii\validators\RangeValidator

屬性詳細資訊

隱藏繼承的屬性

$allowArray public property

是否允許陣列類型屬性。

public boolean $allowArray false
$not public property

是否反轉驗證邏輯。預設為 false。如果設定為 true,則屬性值不應在透過 $range 定義的值列表中。

public boolean $not false
$range public property

屬性值應在其中的有效值列表,或傳回此類列表的匿名函式。匿名函式的簽名應如下所示,

function($model, $attribute) {
    // compute range
    return $range;
}
$strict public property

比較是否嚴格 (類型和值都必須相同)

public boolean $strict false

方法詳細資訊

隱藏繼承的方法

__call() public method

定義於: yii\base\Component::__call()

呼叫非類別方法的具名方法。

此方法將檢查是否有任何附加的行為具有指定的名稱方法,如果有的話,將執行它。

請勿直接呼叫此方法,因為它是 PHP 魔術方法,當呼叫未知的方法時,將會隱式呼叫它。

public mixed __call ( $name, $params )
$name string

方法名稱

$params array

方法參數

return mixed

方法的傳回值

throws yii\base\UnknownMethodException

當呼叫未知方法時

                public function __call($name, $params)
{
    $this->ensureBehaviors();
    foreach ($this->_behaviors as $object) {
        if ($object->hasMethod($name)) {
            return call_user_func_array([$object, $name], $params);
        }
    }
    throw new UnknownMethodException('Calling unknown method: ' . get_class($this) . "::$name()");
}

            
__clone() public method

定義於: yii\base\Component::__clone()

在透過複製現有物件建立物件後,會呼叫此方法。

它會移除所有行為,因為它們附加到舊物件。

public void __clone ( )

                public function __clone()
{
    $this->_events = [];
    $this->_eventWildcards = [];
    $this->_behaviors = null;
}

            
__construct() public method

定義於: yii\base\BaseObject::__construct()

建構子。

預設實作執行兩件事

  • 使用給定的組態 $config 初始化物件。
  • 呼叫 init()

如果子類別中覆寫了此方法,建議

  • 建構函式的最後一個參數是組態陣列,例如此處的 $config
  • 在建構函式的結尾呼叫父類別實作。
public void __construct ( $config = [] )
$config array

將用於初始化物件屬性的名稱-值配對

                public function __construct($config = [])
{
    if (!empty($config)) {
        Yii::configure($this, $config);
    }
    $this->init();
}

            
__get() public method

定義於: yii\base\Component::__get()

傳回組件屬性的值。

此方法將依以下順序檢查並採取相應措施

  • getter 定義的屬性:傳回 getter 結果
  • 行為的屬性:傳回行為屬性值

請勿直接呼叫此方法,因為它是 PHP 魔術方法,當執行 $value = $component->property; 時,將會隱式呼叫它。

另請參閱 __set()

public mixed __get ( $name )
$name string

屬性名稱

return mixed

屬性值或行為的屬性值

throws yii\base\UnknownPropertyException

如果未定義屬性

throws yii\base\InvalidCallException

如果屬性為唯寫。

                public function __get($name)
{
    $getter = 'get' . $name;
    if (method_exists($this, $getter)) {
        // read property, e.g. getName()
        return $this->$getter();
    }
    // behavior property
    $this->ensureBehaviors();
    foreach ($this->_behaviors as $behavior) {
        if ($behavior->canGetProperty($name)) {
            return $behavior->$name;
        }
    }
    if (method_exists($this, 'set' . $name)) {
        throw new InvalidCallException('Getting write-only property: ' . get_class($this) . '::' . $name);
    }
    throw new UnknownPropertyException('Getting unknown property: ' . get_class($this) . '::' . $name);
}

            
__isset() public method

定義於: yii\base\Component::__isset()

檢查屬性是否已設定,即已定義且非 null。

此方法將依以下順序檢查並採取相應措施

  • setter 定義的屬性:傳回屬性是否已設定
  • 行為的屬性:傳回屬性是否已設定
  • 針對不存在的屬性傳回 false

請勿直接呼叫此方法,因為它是 PHP 魔術方法,當執行 isset($component->property) 時,將會隱式呼叫它。

另請參閱 https://php.dev.org.tw/manual/en/function.isset.php

public boolean __isset ( $name )
$name string

屬性名稱或事件名稱

return boolean

命名的屬性是否已設定

                public function __isset($name)
{
    $getter = 'get' . $name;
    if (method_exists($this, $getter)) {
        return $this->$getter() !== null;
    }
    // behavior property
    $this->ensureBehaviors();
    foreach ($this->_behaviors as $behavior) {
        if ($behavior->canGetProperty($name)) {
            return $behavior->$name !== null;
        }
    }
    return false;
}

            
__set() public method

定義於: yii\base\Component::__set()

設定組件屬性的值。

此方法將依以下順序檢查並採取相應措施

  • setter 定義的屬性:設定屬性值
  • 格式為 "on xyz" 的事件:將處理器附加到事件 "xyz"
  • 格式為 "as xyz" 的行為:附加名為 "xyz" 的行為
  • 行為的屬性:設定行為屬性值

請勿直接呼叫此方法,因為它是 PHP 魔術方法,當執行 $component->property = $value; 時,將會隱式呼叫它。

另請參閱 __get()

public void __set ( $name, $value )
$name string

屬性名稱或事件名稱

$value mixed

屬性值

throws yii\base\UnknownPropertyException

如果未定義屬性

throws yii\base\InvalidCallException

如果屬性為唯讀。

                public function __set($name, $value)
{
    $setter = 'set' . $name;
    if (method_exists($this, $setter)) {
        // set property
        $this->$setter($value);
        return;
    } elseif (strncmp($name, 'on ', 3) === 0) {
        // on event: attach event handler
        $this->on(trim(substr($name, 3)), $value);
        return;
    } elseif (strncmp($name, 'as ', 3) === 0) {
        // as behavior: attach behavior
        $name = trim(substr($name, 3));
        $this->attachBehavior($name, $value instanceof Behavior ? $value : Yii::createObject($value));
        return;
    }
    // behavior property
    $this->ensureBehaviors();
    foreach ($this->_behaviors as $behavior) {
        if ($behavior->canSetProperty($name)) {
            $behavior->$name = $value;
            return;
        }
    }
    if (method_exists($this, 'get' . $name)) {
        throw new InvalidCallException('Setting read-only property: ' . get_class($this) . '::' . $name);
    }
    throw new UnknownPropertyException('Setting unknown property: ' . get_class($this) . '::' . $name);
}

            
__unset() public method

定義於: yii\base\Component::__unset()

將組件屬性設定為 null。

此方法將依以下順序檢查並採取相應措施

  • setter 定義的屬性:將屬性值設定為 null
  • 行為的屬性:將屬性值設定為 null

請勿直接呼叫此方法,因為它是 PHP 魔術方法,當執行 unset($component->property) 時,將會隱式呼叫它。

另請參閱 https://php.dev.org.tw/manual/en/function.unset.php

public void __unset ( $name )
$name string

屬性名稱

throws yii\base\InvalidCallException

如果屬性為唯讀。

                public function __unset($name)
{
    $setter = 'set' . $name;
    if (method_exists($this, $setter)) {
        $this->$setter(null);
        return;
    }
    // behavior property
    $this->ensureBehaviors();
    foreach ($this->_behaviors as $behavior) {
        if ($behavior->canSetProperty($name)) {
            $behavior->$name = null;
            return;
        }
    }
    throw new InvalidCallException('Unsetting an unknown or read-only property: ' . get_class($this) . '::' . $name);
}

            
addError() public method

定義於: yii\validators\Validator::addError()

將關於指定屬性的錯誤新增至模型物件。

這是一個輔助方法,用於執行訊息選擇和國際化。

public void addError ( $model, $attribute, $message, $params = [] )
$model yii\base\Model

正在驗證的資料模型

$attribute string

正在驗證的屬性

$message string

錯誤訊息

$params array

錯誤訊息中佔位符的值

                public function addError($model, $attribute, $message, $params = [])
{
    $params['attribute'] = $model->getAttributeLabel($attribute);
    if (!isset($params['value'])) {
        $value = $model->$attribute;
        if (is_array($value)) {
            $params['value'] = 'array()';
        } elseif (is_object($value) && !method_exists($value, '__toString')) {
            $params['value'] = '(object)';
        } else {
            $params['value'] = $value;
        }
    }
    $model->addError($attribute, $this->formatMessage($message, $params));
}

            
attachBehavior() public method

定義於: yii\base\Component::attachBehavior()

將行為附加到此組件。

此方法將根據給定的組態建立行為物件。之後,將透過呼叫 yii\base\Behavior::attach() 方法將行為物件附加到此元件。

另請參閱 detachBehavior()

public yii\base\Behavior attachBehavior ( $name, $behavior )
$name string

行為的名稱。

$behavior string|array|yii\base\Behavior

行為組態。可以是以下其中一項

return yii\base\Behavior

行為物件

                public function attachBehavior($name, $behavior)
{
    $this->ensureBehaviors();
    return $this->attachBehaviorInternal($name, $behavior);
}

            
attachBehaviors() public method

定義於: yii\base\Component::attachBehaviors()

將行為列表附加到組件。

每個行為都以其名稱索引,並且應該是一個 yii\base\Behavior 物件、一個指定行為類別的字串,或一個用於建立行為的組態陣列。

另請參閱 attachBehavior()

public void attachBehaviors ( $behaviors )
$behaviors array

要附加到元件的行為列表

                public function attachBehaviors($behaviors)
{
    $this->ensureBehaviors();
    foreach ($behaviors as $name => $behavior) {
        $this->attachBehaviorInternal($name, $behavior);
    }
}

            
behaviors() public method

定義於: yii\base\Component::behaviors()

傳回此組件應表現為的行為列表。

子類別可以覆寫此方法,以指定它們希望表現為的行為。

此方法的傳回值應該是以行為名稱索引的行為物件或組態陣列。行為組態可以是指定行為類別的字串,或具有以下結構的陣列

'behaviorName' => [
    'class' => 'BehaviorClass',
    'property1' => 'value1',
    'property2' => 'value2',
]

請注意,行為類別必須從 yii\base\Behavior 擴展。行為可以使用名稱或匿名方式附加。當名稱用作陣列索引鍵時,使用此名稱,稍後可以使用 getBehavior() 檢索行為,或使用 detachBehavior() 卸載行為。匿名行為無法檢索或卸載。

在此方法中宣告的行為將自動(按需)附加到元件。

public array behaviors ( )
return array

行為組態。

                public function behaviors()
{
    return [];
}

            
canGetProperty() public method

定義於: yii\base\Component::canGetProperty()

傳回一個值,指示屬性是否可讀取。

如果滿足以下條件,則可以讀取屬性

  • 類別具有與指定名稱關聯的 getter 方法(在這種情況下,屬性名稱不區分大小寫);
  • 類別具有具有指定名稱的成員變數(當 $checkVars 為 true 時);
  • 附加的行為具有給定名稱的可讀屬性(當 $checkBehaviors 為 true 時)。

另請參閱 canSetProperty()

public boolean canGetProperty ( $name, $checkVars true, $checkBehaviors true )
$name string

屬性名稱

$checkVars boolean

是否將成員變數視為屬性

$checkBehaviors boolean

是否將行為的屬性視為此元件的屬性

return boolean

屬性是否可以讀取

                public function canGetProperty($name, $checkVars = true, $checkBehaviors = true)
{
    if (method_exists($this, 'get' . $name) || $checkVars && property_exists($this, $name)) {
        return true;
    } elseif ($checkBehaviors) {
        $this->ensureBehaviors();
        foreach ($this->_behaviors as $behavior) {
            if ($behavior->canGetProperty($name, $checkVars)) {
                return true;
            }
        }
    }
    return false;
}

            
canSetProperty() public method

定義於: yii\base\Component::canSetProperty()

傳回一個值,指示屬性是否可設定。

如果滿足以下條件,則可以寫入屬性

  • 類別具有與指定名稱關聯的 setter 方法(在這種情況下,屬性名稱不區分大小寫);
  • 類別具有具有指定名稱的成員變數(當 $checkVars 為 true 時);
  • 附加的行為具有給定名稱的可寫屬性(當 $checkBehaviors 為 true 時)。

另請參閱 canGetProperty()

public boolean canSetProperty ( $name, $checkVars true, $checkBehaviors true )
$name string

屬性名稱

$checkVars boolean

是否將成員變數視為屬性

$checkBehaviors boolean

是否將行為的屬性視為此元件的屬性

return boolean

屬性是否可以寫入

                public function canSetProperty($name, $checkVars = true, $checkBehaviors = true)
{
    if (method_exists($this, 'set' . $name) || $checkVars && property_exists($this, $name)) {
        return true;
    } elseif ($checkBehaviors) {
        $this->ensureBehaviors();
        foreach ($this->_behaviors as $behavior) {
            if ($behavior->canSetProperty($name, $checkVars)) {
                return true;
            }
        }
    }
    return false;
}

            
className() public static method
自 2.0.14 版本起已棄用。在 PHP >=5.5 上,請改用 ::class

定義於: yii\base\BaseObject::className()

傳回此類別的完整限定名稱。

public static string className ( )
return string

此類別的完整限定名稱。

                public static function className()
{
    return get_called_class();
}

            
clientValidateAttribute() public method

傳回執行客戶端驗證所需的 JavaScript。

呼叫 getClientOptions() 以產生用於用戶端驗證的選項陣列。

如果驗證器可以支援用戶端驗證,您可以覆寫此方法以傳回 JavaScript 驗證程式碼。

以下 JavaScript 變數是預先定義的,可以在驗證程式碼中使用

  • attribute:描述正在驗證的屬性的物件。
  • value:正在驗證的值。
  • messages:用於保存屬性的驗證錯誤訊息的陣列。
  • deferred:用於保存非同步驗證的延遲物件的陣列
  • $form:包含表單元素的 jQuery 物件

attribute 物件包含以下屬性

  • id:在表單中識別屬性的唯一 ID(例如 "loginform-username")
  • name:屬性名稱或表達式(例如表格輸入的 "[0]content")
  • container:輸入欄位容器的 jQuery 選取器
  • input:表單上下文中輸入欄位的 jQuery 選取器
  • error:容器上下文中錯誤標籤的 jQuery 選取器
  • status:輸入欄位的狀態,0:空白,之前未輸入,1:已驗證,2:待驗證,3:正在驗證
public string|null clientValidateAttribute ( $model, $attribute, $view )
$model yii\base\Model

正在驗證的資料模型

$attribute string

要驗證的屬性名稱。

$view yii\web\View

將用於呈現視圖或包含應用此驗證器的模型表單的視圖檔案的視圖物件。

return string|null

用戶端驗證腳本。如果驗證器不支援用戶端驗證,則為 Null。

                public function clientValidateAttribute($model, $attribute, $view)
{
    if ($this->range instanceof \Closure) {
        $this->range = call_user_func($this->range, $model, $attribute);
    }
    ValidationAsset::register($view);
    $options = $this->getClientOptions($model, $attribute);
    return 'yii.validation.range(value, messages, ' . Json::htmlEncode($options) . ');';
}

            
createValidator() public static method

定義於: yii\validators\Validator::createValidator()

建立驗證器物件。

public static yii\validators\Validator createValidator ( $type, $model, $attributes, $params = [] )
$type string|Closure

驗證器類型。可以是以下之一

  • $builtInValidators 中列出的內建驗證器名稱;
  • 模型類別的方法名稱;
  • 匿名函式;
  • 驗證器類別名稱。
$model yii\base\Model

要驗證的資料模型。

$attributes array|string

要驗證的屬性列表。可以是屬性名稱陣列或逗號分隔的屬性名稱字串。

$params array

要應用於驗證器屬性的初始值。

return yii\validators\Validator

驗證器

                public static function createValidator($type, $model, $attributes, $params = [])
{
    $params['attributes'] = $attributes;
    if ($type instanceof \Closure) {
        $params['class'] = __NAMESPACE__ . '\InlineValidator';
        $params['method'] = $type;
    } elseif (!isset(static::$builtInValidators[$type]) && $model->hasMethod($type)) {
        // method-based validator
        $params['class'] = __NAMESPACE__ . '\InlineValidator';
        $params['method'] = [$model, $type];
    } else {
        unset($params['current']);
        if (isset(static::$builtInValidators[$type])) {
            $type = static::$builtInValidators[$type];
        }
        if (is_array($type)) {
            $params = array_merge($type, $params);
        } else {
            $params['class'] = $type;
        }
    }
    return Yii::createObject($params);
}

            
detachBehavior() public method

定義於: yii\base\Component::detachBehavior()

從組件卸離行為。

將會調用行為的 yii\base\Behavior::detach() 方法。

public yii\base\Behavior|null detachBehavior ( $name )
$name string

行為的名稱。

return yii\base\Behavior|null

已卸載的行為。如果行為不存在,則為 Null。

                public function detachBehavior($name)
{
    $this->ensureBehaviors();
    if (isset($this->_behaviors[$name])) {
        $behavior = $this->_behaviors[$name];
        unset($this->_behaviors[$name]);
        $behavior->detach();
        return $behavior;
    }
    return null;
}

            
detachBehaviors() public method

定義於: yii\base\Component::detachBehaviors()

從組件卸離所有行為。

public void detachBehaviors ( )

                public function detachBehaviors()
{
    $this->ensureBehaviors();
    foreach ($this->_behaviors as $name => $behavior) {
        $this->detachBehavior($name);
    }
}

            
ensureBehaviors() public method

定義於: yii\base\Component::ensureBehaviors()

確保在 behaviors() 中宣告的行為已附加到此組件。

public void ensureBehaviors ( )

                public function ensureBehaviors()
{
    if ($this->_behaviors === null) {
        $this->_behaviors = [];
        foreach ($this->behaviors() as $name => $behavior) {
            $this->attachBehaviorInternal($name, $behavior);
        }
    }
}

            
formatMessage() protected method (available since version 2.0.12)

定義於: yii\validators\Validator::formatMessage()

如果 \Yii::$app 不可用,則使用 I18N 格式化訊息,或使用簡單的 strtr。

protected string formatMessage ( $message, $params )
$message string
$params array

                protected function formatMessage($message, $params)
{
    if (Yii::$app !== null) {
        return \Yii::$app->getI18n()->format($message, $params, Yii::$app->language);
    }
    $placeholders = [];
    foreach ((array) $params as $name => $value) {
        $placeholders['{' . $name . '}'] = $value;
    }
    return ($placeholders === []) ? $message : strtr($message, $placeholders);
}

            
getAttributeNames() public method (available since version 2.0.12)

定義於: yii\validators\Validator::getAttributeNames()

傳回已清除的屬性名稱,不包含開頭的 ! 字元。

public array getAttributeNames ( )
return array

屬性名稱。

                public function getAttributeNames()
{
    return array_map(function ($attribute) {
        return ltrim($attribute, '!');
    }, $this->attributes);
}

            
getBehavior() public method

定義於: yii\base\Component::getBehavior()

傳回具名的行為物件。

public yii\base\Behavior|null getBehavior ( $name )
$name string

行為名稱

return yii\base\Behavior|null

行為物件,如果行為不存在,則為 null

                public function getBehavior($name)
{
    $this->ensureBehaviors();
    return isset($this->_behaviors[$name]) ? $this->_behaviors[$name] : null;
}

            
getBehaviors() public method

定義於: yii\base\Component::getBehaviors()

傳回附加到此組件的所有行為。

public yii\base\Behavior[] getBehaviors ( )
return yii\base\Behavior[]

附加到此組件的行為列表

                public function getBehaviors()
{
    $this->ensureBehaviors();
    return $this->_behaviors;
}

            
getClientOptions() public method (available since version 2.0.11)

傳回客戶端驗證選項。

此方法通常從 clientValidateAttribute() 呼叫。 您可以覆寫此方法來修改將傳遞到用戶端驗證的選項。

public array getClientOptions ( $model, $attribute )
$model yii\base\Model

正在驗證的模型

$attribute string

正在驗證的屬性名稱

return array

用戶端驗證選項

                public function getClientOptions($model, $attribute)
{
    $range = [];
    foreach ($this->range as $value) {
        $range[] = (string) $value;
    }
    $options = [
        'range' => $range,
        'not' => $this->not,
        'message' => $this->formatMessage($this->message, [
            'attribute' => $model->getAttributeLabel($attribute),
        ]),
    ];
    if ($this->skipOnEmpty) {
        $options['skipOnEmpty'] = 1;
    }
    if ($this->allowArray) {
        $options['allowArray'] = 1;
    }
    return $options;
}

            
getValidationAttributes() public method (available since version 2.0.16)

定義於: yii\validators\Validator::getValidationAttributes()

傳回此驗證器套用的屬性列表。

public array|null getValidationAttributes ( $attributes null )
$attributes array|string|null

要驗證的屬性列表。

return array|null

屬性名稱列表。

                public function getValidationAttributes($attributes = null)
{
    if ($attributes === null) {
        return $this->getAttributeNames();
    }
    if (is_scalar($attributes)) {
        $attributes = [$attributes];
    }
    $newAttributes = [];
    $attributeNames = $this->getAttributeNames();
    foreach ($attributes as $attribute) {
        // do not strict compare, otherwise int attributes would fail due to to string conversion in getAttributeNames() using ltrim().
        if (in_array($attribute, $attributeNames, false)) {
            $newAttributes[] = $attribute;
        }
    }
    return $newAttributes;
}

            
hasEventHandlers() public method

定義於: yii\base\Component::hasEventHandlers()

傳回一個值,指示是否有名稱事件附加任何處理常式。

public boolean hasEventHandlers ( $name )
$name string

事件名稱

return boolean

是否有任何處理程序附加到事件。

                public function hasEventHandlers($name)
{
    $this->ensureBehaviors();
    if (!empty($this->_events[$name])) {
        return true;
    }
    foreach ($this->_eventWildcards as $wildcard => $handlers) {
        if (!empty($handlers) && StringHelper::matchWildcard($wildcard, $name)) {
            return true;
        }
    }
    return Event::hasHandlers($this, $name);
}

            
hasMethod() public method

定義於: yii\base\Component::hasMethod()

傳回一個值,指示是否已定義方法。

如果滿足以下條件,則定義了方法

  • 類別具有指定名稱的方法
  • 附加的行為具有給定名稱的方法(當 $checkBehaviors 為 true 時)。
public boolean hasMethod ( $name, $checkBehaviors true )
$name string

屬性名稱

$checkBehaviors boolean

是否將行為的方法視為此組件的方法

return boolean

方法是否已定義

                public function hasMethod($name, $checkBehaviors = true)
{
    if (method_exists($this, $name)) {
        return true;
    } elseif ($checkBehaviors) {
        $this->ensureBehaviors();
        foreach ($this->_behaviors as $behavior) {
            if ($behavior->hasMethod($name)) {
                return true;
            }
        }
    }
    return false;
}

            
hasProperty() public method

定義於: yii\base\Component::hasProperty()

傳回一個值,指示是否已為此元件定義屬性。

如果滿足以下條件,則定義了屬性

  • 類別具有與指定名稱相關聯的 getter 或 setter 方法(在這種情況下,屬性名稱不區分大小寫);
  • 類別具有具有指定名稱的成員變數(當 $checkVars 為 true 時);
  • 附加的行為具有給定名稱的屬性(當 $checkBehaviors 為 true 時)。

另請參閱

public boolean hasProperty ( $name, $checkVars true, $checkBehaviors true )
$name string

屬性名稱

$checkVars boolean

是否將成員變數視為屬性

$checkBehaviors boolean

是否將行為的屬性視為此元件的屬性

return boolean

屬性是否已定義

                public function hasProperty($name, $checkVars = true, $checkBehaviors = true)
{
    return $this->canGetProperty($name, $checkVars, $checkBehaviors) || $this->canSetProperty($name, false, $checkBehaviors);
}

            
init() public method

初始化物件。

在物件使用給定配置初始化後,此方法會在建構函式的結尾被調用。

public void init ( )

                public function init()
{
    parent::init();
    if (
        !is_array($this->range)
        && !($this->range instanceof \Closure)
        && !($this->range instanceof \Traversable)
    ) {
        throw new InvalidConfigException('The "range" property must be set.');
    }
    if ($this->message === null) {
        $this->message = Yii::t('yii', '{attribute} is invalid.');
    }
}

            
isActive() public method

定義於: yii\validators\Validator::isActive()

傳回一個值,指示驗證器是否針對給定的情境和屬性處於活動狀態。

如果滿足以下條件,驗證器處於活動狀態

  • 驗證器的 on 屬性為空,或
  • 驗證器的 on 屬性包含指定的場景
public boolean isActive ( $scenario )
$scenario string

場景名稱

return boolean

驗證器是否適用於指定的場景。

                public function isActive($scenario)
{
    return !in_array($scenario, $this->except, true) && (empty($this->on) || in_array($scenario, $this->on, true));
}

            
isEmpty() public method

定義於: yii\validators\Validator::isEmpty()

檢查給定的值是否為空。

如果值為 null、空陣列或空字串,則該值被視為空。 請注意,此方法與 PHP empty() 不同。 當值為 0 時,它將傳回 false。

public boolean isEmpty ( $value )
$value mixed

要檢查的值

return boolean

值是否為空

                public function isEmpty($value)
{
    if ($this->isEmpty !== null) {
        return call_user_func($this->isEmpty, $value);
    }
    return $value === null || $value === [] || $value === '';
}

            
off() public method

定義於: yii\base\Component::off()

從此元件中卸載現有的事件處理器。

此方法與 on() 相反。

注意:如果為事件名稱傳遞了萬用字元模式,則只會移除使用此萬用字元註冊的處理程序,而使用與此萬用字元匹配的純名稱註冊的處理程序將保留。

另請參閱 on()

public boolean off ( $name, $handler null )
$name string

事件名稱

$handler callable|null

要移除的事件處理程序。 如果為 null,則將移除附加到具名事件的所有處理程序。

return boolean

如果找到並分離處理程序

                public function off($name, $handler = null)
{
    $this->ensureBehaviors();
    if (empty($this->_events[$name]) && empty($this->_eventWildcards[$name])) {
        return false;
    }
    if ($handler === null) {
        unset($this->_events[$name], $this->_eventWildcards[$name]);
        return true;
    }
    $removed = false;
    // plain event names
    if (isset($this->_events[$name])) {
        foreach ($this->_events[$name] as $i => $event) {
            if ($event[0] === $handler) {
                unset($this->_events[$name][$i]);
                $removed = true;
            }
        }
        if ($removed) {
            $this->_events[$name] = array_values($this->_events[$name]);
            return true;
        }
    }
    // wildcard event names
    if (isset($this->_eventWildcards[$name])) {
        foreach ($this->_eventWildcards[$name] as $i => $event) {
            if ($event[0] === $handler) {
                unset($this->_eventWildcards[$name][$i]);
                $removed = true;
            }
        }
        if ($removed) {
            $this->_eventWildcards[$name] = array_values($this->_eventWildcards[$name]);
            // remove empty wildcards to save future redundant regex checks:
            if (empty($this->_eventWildcards[$name])) {
                unset($this->_eventWildcards[$name]);
            }
        }
    }
    return $removed;
}

            
on() public method

定義於: yii\base\Component::on()

將事件處理器附加到事件。

事件處理程序必須是有效的 PHP 回呼。 以下是一些範例

function ($event) { ... }         // anonymous function
[$object, 'handleClick']          // $object->handleClick()
['Page', 'handleClick']           // Page::handleClick()
'handleClick'                     // global function handleClick()

事件處理程序必須使用以下簽名定義,

function ($event)

其中 $event 是一個 yii\base\Event 物件,其中包含與事件相關聯的參數。

自 2.0.14 版起,您可以將事件名稱指定為萬用字元模式

$component->on('event.group.*', function ($event) {
    Yii::trace($event->name . ' is triggered.');
});

另請參閱 off()

public void on ( $name, $handler, $data null, $append true )
$name string

事件名稱

$handler 可呼叫

事件處理程序

$data mixed

事件觸發時要傳遞給事件處理程序的資料。 當調用事件處理程序時,可以透過 yii\base\Event::$data 存取此資料。

$append boolean

是否將新的事件處理程序附加到現有處理程序列表的末尾。 如果為 false,則新處理程序將插入到現有處理程序列表的開頭。

                public function on($name, $handler, $data = null, $append = true)
{
    $this->ensureBehaviors();
    if (strpos($name, '*') !== false) {
        if ($append || empty($this->_eventWildcards[$name])) {
            $this->_eventWildcards[$name][] = [$handler, $data];
        } else {
            array_unshift($this->_eventWildcards[$name], [$handler, $data]);
        }
        return;
    }
    if ($append || empty($this->_events[$name])) {
        $this->_events[$name][] = [$handler, $data];
    } else {
        array_unshift($this->_events[$name], [$handler, $data]);
    }
}

            
trigger() public method

定義於: yii\base\Component::trigger()

觸發事件。

此方法表示事件的發生。 它調用事件的所有附加處理程序,包括類別層級的處理程序。

public void trigger ( $name, yii\base\Event $event null )
$name string

事件名稱

$event yii\base\Event|null

事件實例。 如果未設定,將建立預設的 yii\base\Event 物件。

                public function trigger($name, Event $event = null)
{
    $this->ensureBehaviors();
    $eventHandlers = [];
    foreach ($this->_eventWildcards as $wildcard => $handlers) {
        if (StringHelper::matchWildcard($wildcard, $name)) {
            $eventHandlers[] = $handlers;
        }
    }
    if (!empty($this->_events[$name])) {
        $eventHandlers[] = $this->_events[$name];
    }
    if (!empty($eventHandlers)) {
        $eventHandlers = call_user_func_array('array_merge', $eventHandlers);
        if ($event === null) {
            $event = new Event();
        }
        if ($event->sender === null) {
            $event->sender = $this;
        }
        $event->handled = false;
        $event->name = $name;
        foreach ($eventHandlers as $handler) {
            $event->data = $handler[1];
            call_user_func($handler[0], $event);
            // stop further handling if the event is handled
            if ($event->handled) {
                return;
            }
        }
    }
    // invoke class-level attached handlers
    Event::trigger($this, $name, $event);
}

            
validate() public method

定義於: yii\validators\Validator::validate()

驗證給定的值。

您可以透過此方法在資料模型上下文之外驗證值。

public boolean validate ( $value, &$error null )
$value mixed

要驗證的資料值。

$error string|null

如果驗證失敗,則傳回的錯誤訊息。

return boolean

資料是否有效。

                public function validate($value, &$error = null)
{
    $result = $this->validateValue($value);
    if (empty($result)) {
        return true;
    }
    list($message, $params) = $result;
    $params['attribute'] = Yii::t('yii', 'the input value');
    if (is_array($value)) {
        $params['value'] = 'array()';
    } elseif (is_object($value)) {
        $params['value'] = 'object';
    } else {
        $params['value'] = $value;
    }
    $error = $this->formatMessage($message, $params);
    return false;
}

            
validateAttribute() public method

驗證單一屬性。

子類別必須實作此方法以提供實際的驗證邏輯。

public void validateAttribute ( $model, $attribute )
$model yii\base\Model

要驗證的資料模型

$attribute string

要驗證的屬性名稱。

                public function validateAttribute($model, $attribute)
{
    if ($this->range instanceof \Closure) {
        $this->range = call_user_func($this->range, $model, $attribute);
    }
    parent::validateAttribute($model, $attribute);
}

            
validateAttributes() public method

定義於: yii\validators\Validator::validateAttributes()

驗證指定的物件。

public void validateAttributes ( $model, $attributes null )
$model yii\base\Model

正在驗證的資料模型

$attributes array|string|null

要驗證的屬性列表。 請注意,如果屬性未與驗證器關聯,則會忽略它。 如果此參數為 null,則將驗證 $attributes 中列出的每個屬性。

                public function validateAttributes($model, $attributes = null)
{
    $attributes = $this->getValidationAttributes($attributes);
    foreach ($attributes as $attribute) {
        $skip = $this->skipOnError && $model->hasErrors($attribute)
            || $this->skipOnEmpty && $this->isEmpty($model->$attribute);
        if (!$skip) {
            if ($this->when === null || call_user_func($this->when, $model, $attribute)) {
                $this->validateAttribute($model, $attribute);
            }
        }
    }
}

            
validateValue() protected method

驗證值。

驗證器類別可以實作此方法,以支援在資料模型上下文之外進行資料驗證。

protected array|null validateValue ( $value )
$value mixed

要驗證的資料值。

return array|null

錯誤訊息和要插入錯誤訊息的參數陣列。 `php if (!$valid) {

return [$this->message, [
    'param1' => $this->param1,
    'formattedLimit' => Yii::$app->formatter->asShortSize($this->getSizeLimit()),
    'mimeTypes' => implode(', ', $this->mimeTypes),
    'param4' => 'etc...',
]];

}

return null; ` 對於此範例,message 範本可以包含 {param1}{formattedLimit}{mimeTypes}{param4}

如果資料有效,則應傳回 Null。

throws yii\base\NotSupportedException

如果驗證器不支援在沒有模型的情況下進行資料驗證

                protected function validateValue($value)
{
    $in = false;
    if (
        $this->allowArray
        && ($value instanceof \Traversable || is_array($value))
        && ArrayHelper::isSubset($value, $this->range, $this->strict)
    ) {
        $in = true;
    }
    if (!$in && ArrayHelper::isIn($value, $this->range, $this->strict)) {
        $in = true;
    }
    return $this->not !== $in ? null : [$this->message, []];
}